Early Guitars and Vihuela

A network for historic guitars and vihuelas

Michael. N.'s Discussions (97)

Search Forum

View

Discussions Replied To (91) Replies Latest Activity

"I suspect that 2 mm on a Panormo might be thin but it wouldn't surprise me if that w…"

Michael. N. replied May 31, 2012 to Bar below the bridge

 12 May 31, 2012
Reply by Michael. N.

"It was scalloped, similar in manner to the way that some steel string makers shape t…"

Michael. N. replied May 30, 2012 to Bar below the bridge

 12 May 31, 2012
Reply by Michael. N.

"Those cases are an absolute bargain in Canada/US. By the time they arrive in Europe…"

Michael. N. replied May 25, 2012 to New Member

 36 Aug 8, 2012
Reply by Robert Brochey

"Try: http://www.williamcowley.co.uk/ You are looking for sheepskin Parchment of arou…"

Michael. N. replied Oct 26, 2011 to Hole punches?

 24 Dec 6, 2011
Reply by Mikko Ikäheimo

"Even solid punches can work very well. All of those that I made are of the solid typ…"

Michael. N. replied Oct 22, 2011 to Hole punches?

 24 Dec 6, 2011
Reply by Mikko Ikäheimo

"Somewhere I have seen a close up photograph of a Voboam that showed the grain direct…"

Michael. N. replied Oct 21, 2011 to Baroque guitar barring

 4 Oct 21, 2011
Reply by Michael. N.

"Tension is somewhat dependent on the individual Player. Here are my suggestions for…"

Michael. N. replied Oct 14, 2011 to Buying Baroque Guitar Strings

 39 Jan 14, 2017
Reply by Monica Hall

"The Early music Shop will have the strings, just not as a set. They do Nylgut. Just…"

Michael. N. replied Oct 14, 2011 to Buying Baroque Guitar Strings

 39 Jan 14, 2017
Reply by Monica Hall

"Sorry. I misread the title. The ribs can be joined and then bent after. Hide glue wo…"

Michael. N. replied Oct 8, 2011 to Multi-part guitar ribs - at what stage are they bent?

 11 Nov 5, 2011
Reply by Bill Samson

"They are roughly cut out, bent and then joined on the mould. On a round Back it woul…"

Michael. N. replied Oct 8, 2011 to Multi-part guitar ribs - at what stage are they bent?

 11 Nov 5, 2011
Reply by Bill Samson

RSS

© 2025   Created by Jelma van Amersfoort.   Powered by

Badges  |  Report an Issue  |  Terms of Service